LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2006 >> Durango 3.7 K, 42RLE/VLP >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Delivery >> Tank-Fuel >> Installation

Fuel Delivery: Tank-Fuel: Installation

  1. If fuel tank is to be replaced, install fuel pump module into tank. (Refer to FUEL SYSTEM/FUEL DELIVERY/FUEL PUMP MODULE - INSTALLATION) .
  2. Position fuel tank to hydraulic jack.
  3. Raise tank until positioned near body.
  4. Connect EVAP, ORVR and NVLD lines at front of tank.
  5. Connect fuel pump module electrical connector at top of tank.
  6. Connect fuel line quick-connect fitting to pump module. (Refer to FUEL SYSTEM/FUEL DELIVERY/QUICK CONNECT FITTING - STANDARD PROCEDURE) .
  7. Continue raising tank until positioned snug to body.
  8. Install and position both tank support straps. Install two fuel tank strap bolts and tighten to 30 ft. lbs. (40 N.m).
  9. Connect rubber fill and vent hoses to fuel tank fittings and tighten hose clamps.
  10. If equipped, install fuel tank skid plate.
  11. Lower vehicle.
  12. Fill fuel tank with fuel.
  13. Start engine and check for fuel leaks near top of module.
scientia non olet · About LEMON Manuals