LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2006 >> Durango 3.7 K, 42RLE/VLP >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module-Seat Memory >> Removal

Module-Seat Memory: Removal

Fig 1: Remove/Install Memory Seat Module
GC0009824Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect and isolate the battery negative cable.
  2. Remove the driver seat cushion/cover (2) (Refer to BODY/SEATS/SEAT CUSHION/COVER - FRONT - REMOVAL) .
  3. Unsnap the memory seat module (4) from the side brackets.
  4. Pivot the module upward and disconnect the electrical connectors (1).
  5. Pull the module rearward to remove it from the front of the seat frame (3).
scientia non olet · About LEMON Manuals