LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2006 >> Durango 3.7 K, 42RLE/VLP >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module-Seat Memory >> Installation

Module-Seat Memory: Installation

Fig 1: Remove/Install Memory Seat Module
GC0009824Courtesy of DAIMLERCHRYSLER CORP.
  1. Place the module (4) into position making sure the front snaps into the seat frame (3).
  2. Connect the memory seat module harness connectors (1).
  3. Pivot the module (4) downward and snap it into place in the side brackets.
  4. Install the driver seat cushion/cover (2) (Refer to BODY/SEATS/SEAT CUSHION COVER - FRONT - INSTALLATION) .
  5. Connect the battery negative cable.
  6. Using an appropriate scan tool, go to the MSM miscellaneous functions and perform the standardization routine.
  7. Verify system and vehicle operation.
scientia non olet · About LEMON Manuals