LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2005 >> Viper >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Restraints System (Service Information) >> Driver Airbag >> Removal

Driver Airbag: Removal

Follow all Warnings for airbag component service (Refer to ELECTRICAL/RESTRAINTS - WARNING) .

CAUTION: When removing a DEPLOYED airbag, rubber gloves, eye protection and long sleeved shirt should be worn, as there may be deposits on the surface which could irritate the skin and eyes.
  1. Open deck lid.
  2. Remove four bolts to battery compartment cover and remove cover.
  3. Disconnect and isolate the battery negative cable.
  4. Wait two minutes for the airbag system reserve capacitor to discharge before beginning any airbag system or instrument panel component service.
  5. Remove two bolts retaining Driver Airbag.
  6. Lift airbag and disconnect airbag and horn wire connectors.
  7. Remove Driver Airbag from vehicle.
WARNING: WHEN REPLACING A DEPLOYED DRIVER AIRBAG, THE CLOCK SPRING MUST ALSO BE REPLACED (Refer to ELECTRICAL/RESTRAINTS/CLOCK SPRING - REMOVAL) .
scientia non olet · About LEMON Manuals