LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2005 >> Viper >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 8.3L Engine >> Rocker Arms >> Installation

Rocker Arms: Installation

NOTE: Before replacing parts, inspect all related valvetrain components for damage to prevent engine misfire.
  1. Install rocker arm and pedestal assemblies into position. Ensure push rods are seated properly under each rocker arm. Tighten rocker arm bolts to 35 N.m (26 ft. lbs.). See Figure.
    CAUTION: THE ROCKER ARM PEDESTAL BOLTS SHOULD BE TORQUED DOWN SLOWLY. ALLOW 20 MINUTES TAPPET BLEED DOWN TIME AFTER INSTALLATION OF THE ROCKER BOLTS BEFORE ENGINE OPERATION.
  2. Install cylinder head cover(s) (Refer to ENGINE/CYLINDER HEAD/CYLINDER HEAD COVER(S) - INSTALLATION) .
scientia non olet · About LEMON Manuals