LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2005 >> Viper >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Engine >> Engine Coolant Temperature Sensor >> Installation

Engine Coolant Temperature Sensor: Installation

  1. Install sensor. See Figure. Tighten to 27 N.m (20 ft. lbs.) torque.
  2. Connect electrical connector to sensor.
  3. Fill cooling system (Refer to COOLING/ENGINE - STANDARD PROCEDURE - FILLING COOLING SYSTEM) .
scientia non olet · About LEMON Manuals