LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2005 >> Viper >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Distribution >> Power Outlet >> Removal

Power Outlet: Removal

  1. Disconnect and isolate the battery negative cable.
  2. Look inside and note position of the retaining bosses. See Fig 1.
    Fig 1: POWER OUT REMOVAL
    GC0036734Courtesy of DAIMLERCHRYSLER CORP.
    1 - RETAINING BOSSES-ENGAGE PLIERS HERE
    2 - PARTIALLY REMOVED
    3 - EXTERNAL SNAP-RING PLIERS
    4 - PULL BASE OUT-THROUGH MOUNTING RING
  3. Using external snap ring pliers with 90 degree tips. Insert pliers with tips against bosses and squeeze forcing bosses out of base.
  4. Disconnect the base wires.
  5. Set base aside and remove base mount ring.
scientia non olet · About LEMON Manuals