LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2005 >> Sprinter 2500, Van Cargo >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection >> Crankshaft Position Sensor >> Removal

Crankshaft Position Sensor: Removal

  1. Disconnect the negative battery cable.
  2. Unplug the crankshaft wiring harness connector.
  3. Remove the crankshaft sensor retaining bolt and remove sensor. See Fig 1.
Fig 1: CRANKSHAFT POSITION SENSOR
GC0036973Courtesy of DAIMLERCHRYSLER CORP.
1 - ENGINE BLOCK
2 - WIRING HARNESS CONNECTOR
3 - CRANKSHAFT POSITION SENSOR
4 - STARTER SOLENOID
scientia non olet · About LEMON Manuals