LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2005 >> Sprinter 2500, Van Cargo >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> Starter Motor >> Installation

Starter Motor: Installation

  1. Raise and support vehicle.
  2. Position starter motor to transmission housing.
  3. Install 2 mounting bolts. Refer to TORQUE - STARTER - DIESEL  Specifications.
  4. Lower vehicle.
  5. Connect battery cable and solenoid wiring to solenoid (2 nuts). Refer to TORQUE - STARTER - DIESEL  Specifications.
  6. Position wiring harness trough and install retaining bolt.
  7. Install new nylon tie-wraps to wiring trough.
  8. Connect negative battery cable.
scientia non olet · About LEMON Manuals