LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2005 >> Sprinter 2500, Van Cargo >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules >> Engine Control Module >> Installation

Engine Control Module: Installation

NOTE: THE ECM MUST BE PROGRAMMED TO SUPPORT THE VEHICLE OPTIONS PACKAGE.
  1. Position the ECM into the guide of the retaining bracket. See Figure.
  2. Carefully push the ECM in to the bracket until the bracket tensioning springs engage. See Figure.
  3. Connect the ECM wiring harness connectors. See Figure.
  4. Connect negative battery cable.
scientia non olet · About LEMON Manuals