LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2005 >> Sprinter 2500, Van Cargo >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules >> Central Timer Module >> Installation

Central Timer Module: Installation

  1. Position the Central Timer Module (CTM) in the vehicle
  2. Reconnect the wire harness connectors to the CTM.
  3. Install the screws that secure the CTM. Tighten the screws securely.
  4. Route the seat belt latch wire lead through the hole in the closeout panel and position the panel beneath the driver seat cushion
  5. Install the screws that secure the closeout panel beneath the driver seat cushion. Tighten the screws securely.
  6. Reconnect the wire harness connector to the seat belt latch connector.
  7. Slide the driver seat to back to its original position.
  8. Reconnect the negative battery cable.
scientia non olet · About LEMON Manuals