LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2005 >> Sprinter 2500, Van Cargo >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Vehicle Theft Security >> Sentry Key Remote Entry Module >> Installation >> Sentry Key Remote Entry Module Transponder Ring

Sentry Key Remote Entry Module Transponder Ring

  1. Maneuver wiring through instrument panel. See Figure.
  2. Connect the transponder electrical connect or to the SKREEM. See Figure.
  3. Install the top cover - cluster (Refer to BODY/INSTRUMENT PANEL/TOP COVER - CLUSTER - INSTALLATION)
  4. Snap the SKREEM transponder in place around the ignition cylinder. See Figure.
  5. Install the steering column shrouds.
  6. Connect the battery negative cable.
  7. Verify vehicle and system operation.
  8. Close hood.
scientia non olet · About LEMON Manuals