LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2005 >> SRT-4 >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection >> Fuel Injector >> Standard Procedure >> Removal - Injector Connector

Removal - Injector Connector

Fig 1: Fuel Injectors
GC0019464Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect electrical connectors at the fuel injectors. See Fig 1. To remove connector refer to Fig 2. Pull the red colored slider away from injector (1). While pulling the slider, depress tab (2) and remove connector (3) from injector. The factory fuel injection wiring harness is numerically tagged (INJ 1, INJ 2, etc.) for injector position identification. If harness is not tagged, make note of wiring location before removal.
Fig 2: Remove/Install Injector Connector
GC0006529Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals