LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2005 >> Neon SXT, Standard >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Control >> Knock Sensor >> Removal >> Removal - 1.6L

Removal - 1.6L

  1. Disconnect the negative battery cable.
  2. Remove the fuel rail cover. See Fig 1.
    Fig 1: Fuel Rail Cover
    GC0019424Courtesy of DAIMLERCHRYSLER CORP.
  3. Locate the electrical connector. See Fig 2.
    Fig 2: Connector Location
    GC0019928Courtesy of DAIMLERCHRYSLER CORP.
  4. Disconnect the electrical connector. See Fig 3.
    Fig 3: Electrical Connector
    GC0019929Courtesy of DAIMLERCHRYSLER CORP.
  5. Remove the bolt holding the sensor. See Fig 4.
    Fig 4: Knock Sensor
    GC0019927Courtesy of DAIMLERCHRYSLER CORP.
  6. Remove the sensor. See Fig 5.
Fig 5: Knock Sensor Removal/Installation
GC0019930Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals