LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2005 >> Neon SXT, Standard >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection >> O2 Sensor >> Removal >> Removal - 2.4L Turbo/2.4L SRT-4

Removal - 2.4L Turbo/2.4L SRT-4

  1. Disconnect the negative battery cable.
  2. Unlock and disconnect the electrical connector. It is on the passenger side near the EVAP purge solenoid.
  3. Raise vehicle and support.
  4. Remove sensor using an oxygen sensor crow foot wrench such as Snap-On tool YA8875 or equivalent See Fig 1.
Fig 1: UPSTREAM O2 SENSOR- 2.4L TURBO
GC0019486Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals