LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2005 >> Neon SXT, Standard >> Repair and Diagnosis >> Body & Frame >> Windows >> Interior/Exterior >> Sunroof >> Module Assembly >> Installation

Module Assembly: Installation

  1. With the aid of a helper, position sunroof module in vehicle.
  2. Install fasteners attaching sunroof module to vehicle roof and support braces. Tighten all fasteners to 5 N.m (44 in. lbs.), starting from the front and working rearward and then the motor bracket.
  3. Connect drain tubes.
  4. Connect sunroof motor wiring connector.
  5. Headliner in position connect dome lamp wire connector. Install headlining.
  6. Install the fastener from the headliner bracket to front beam.
  7. Install switch.
  8. Install sunroof welt.
  9. Install B-pillar and C-pillar trim.
  10. Install A-pillar trim.
  11. Install sun visors.
  12. Install all assist handles.
  13. Install sunroof sunshade.
  14. Install sunroof glass panel.
  15. Cycle glass panel open and close.
  16. Ensure glass adjustment, refer to Glass Adjustment procedure.
  17. Verify correct operation.
scientia non olet · About LEMON Manuals