LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2005 >> Durango 4.7 N, 4WD, Part Time >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System & Automatic Transmission Cooling System >> Engine >> Heater-Engine Block >> Installation

Heater-Engine Block: Installation

  1. Thoroughly clean cylinder block core hole and block heater seat.
  2. Insert block heater assembly with element loop pointing at twelve o'clock.
  3. With block heater fully seated, tighten center screw to 2 N.m (17 in. lbs.) torque.
  4. Refill cooling system (Refer to COOLING - STANDARD PROCEDURE) .
  5. Start and warm the engine. Check for leaks.
scientia non olet · About LEMON Manuals