LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2005 >> Durango 4.7 N, 4WD, Part Time >> Repair and Diagnosis >> Engine Mechanical >> Exhaust System >> Muffler >> Installation

Exhaust System: Muffler: Installation

  1. Install muffler to the catalytic converter.
  2. Make sure the alignment tang seats in the alignment slot.
  3. Install exhaust clamp. Do not tighten at this time.
  4. Install muffler isolators.
  5. Install exhaust pipe. Refer to INSTALLATION .
  6. Align muffler and exhaust pipe. Tighten exhaust clamp nuts to 42 N.m (31 ft. lbs.).
  7. Check the exhaust system for contact with body panels. Make the necessary adjustments, if necessary.
  8. Lower vehicle.
  9. Start engine and check for exhaust leaks. Repair exhaust leaks as necessary.
scientia non olet · About LEMON Manuals