LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2005 >> Durango 3.7 K >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System >> Rear Suspension >> Control Arm-Lower >> Installation

Control Arm-Lower: Installation

Fig 1: Lower Control Arm Bolt At Frame
GC0011145Courtesy of DAIMLERCHRYSLER CORP.
  1. Install the lower control arm (4) to the vehicle.
  2. Install the lower control arm bolt (1) and flag nut (3) at the frame (2).
    Fig 2: Lower Control Arm Bolt At Axle
    GC0011144Courtesy of DAIMLERCHRYSLER CORP.
  3. Install the lower control arm bolt (3) and flag nut at the axle (2).
  4. Lower the vehicle to the ground and then tighten the bolts to 251 N.m (185 ft.lbs.).
scientia non olet · About LEMON Manuals