LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2005 >> Durango 3.7 K >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System >> Front Suspension >> Control Arm-Upper >> Installation

Control Arm-Upper: Installation

Fig 1: Control Arm Pivot Bolts
GC0011134Courtesy of DAIMLERCHRYSLER CORP.
  1. Position the control arm (3) into the frame brackets (1 & 2). Install bolts and tighten to 102 N.m (75 ft. lbs.).
  2. Insert ball joint in steering knuckle and tighten ball joint nut to 75 N.m (55 ft. lbs.).
  3. Install the wheel and tire assembly, (Refer to TIRES/WHEELS/WHEELS - STANDARD PROCEDURE) .
  4. Remove the support and lower vehicle.
  5. Perform a wheel alignment, (Refer to SUSPENSION/WHEEL ALIGNMENT - STANDARD PROCEDURE) .
scientia non olet · About LEMON Manuals