Installation - 3.8L
WARNING: This page is about a different car, the 2006 Dodge Grand Caravan, 2006 Dodge Caravan, and 2006 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
The knock sensor threads into the side of the cylinder block in the rear.
- Install knock sensor. Tighten knock sensor to 10 N.m (7 ft. lbs.) torque. Over or under tightening effects knock sensor performance, possibly causing improper spark control.
- Attach electrical connector to knock sensor.
- On All Wheel Drive vehicles install the PTU (Power Transfer Unit) for the rear wheels, refer to appropriate TRANSMISSION article for more information.
- Lower vehicle.
- Connect the negative cable.