LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2005 >> Caravan Base, 2.4 B >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Air Bag Restraint System >> Impact Sensor >> Installation >> Front Impact Sensor

Front Impact Sensor

  1. Position sensor in vehicle. See Figure.
  2. Install the two retaining screws to the impact sensor. See Figure. Torque screws to 7 N.m (62 in. lbs.).
  3. Connect electrical connector. See Figure.
  4. Lower vehicle from hoist.
    WARNING: Do not connect the battery negative cable (Refer to ELECTRICAL/RESTRAINTS - DIAGNOSIS AND TESTING - AIRBAG SYSTEM) . Personal injury or death may result if the system test is not performed first.
  5. Verify vehicle and system operation.
  6. Close hood.
scientia non olet · About LEMON Manuals