Removal - 3.3/3.8L
- Disconnect the negative battery cable.
- Remove the throttle and speed control cables from clip.
- Remove 2 bolts from the Power steering reservoir to intake manifold.
- Loosen the lower nut for the power steering reservoir from stud on ignition coil bracket.
- Reposition the Power steering reservoir. See Fig 1.
Courtesy of DAIMLERCHRYSLER CORP.
- Remove the ignition cables from the ignition coil.
- Disconnect the electrical connector from the ignition coil.
- Remove 2 nuts from the ignition coil studs.