LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2005 >> Caravan Base, 2.4 B >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Delivery >> Fuel Pump Module >> Removal >> Removal - Fold-In-Floor

Removal - Fold-In-Floor

WARNING: RELEASE FUEL SYSTEM PRESSURE BEFORE SERVICING FUEL SYSTEM COMPONENTS. SERVICE VEHICLES IN WELL VENTILATED AREAS AND AVOID IGNITION SOURCES. NEVER SMOKE WHILE SERVICING THE VEHICLE.
  1. Remove fuel filler cap and perform STANDARD PROCEDURE - FUEL SYSTEM PRESSURE RELEASE PROCEDURE  .
  2. Disconnect negative cable.
  3. Drain fuel tank, refer to STANDARD PROCEDURE - DRAINING FUEL TANK .
  4. Remove fuel tank, refer to REMOVAL .
  5. Use tool #9340 to remove the fuel pump module lock ring. See Fig 1.
    Fig 1: Module Lock Ring NSE
    GC0023183Courtesy of DAIMLERCHRYSLER CORP.
    WARNING: THE FUEL RESERVOIR OF THE FUEL PUMP MODULE DOES NOT EMPTY OUT WHEN THE TANK IS DRAINED. THE FUEL IN THE RESERVOIR MAY SPILL OUT WHEN THE MODULE IS REMOVED.
  6. Remove fuel pump module and O-ring from tank. Discard O-ring.
scientia non olet · About LEMON Manuals