LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2005 >> Caravan Base, 2.4 B >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Delivery >> Fuel Pump Module >> Installation >> Installation - Fold-In-Floor

Installation - Fold-In-Floor

NOTE: Be careful not to allow dirt/debris to fall into the fuel tank.
  1. Wipe seal area of tank clean and place a new O-ring seal in position on pump.
  2. Position fuel pump module in tank.
  3. Tighten lock ring using special tool #9340 to install the lock ring. See Figure.
  4. Install fuel tank, refer to INSTALLATION .
  5. Lower vehicle.
  6. Connect negative cable battery.
  7. Fill fuel tank. Use the DRB III(R) scan tool to pressurize the fuel system. Check for leaks.
  8. Install fuel filler cap.
scientia non olet · About LEMON Manuals