LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2004 >> Viper >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Fuel Injection >> Throttle Body >> Installation

Throttle Body: Installation

  1. Mount throttle body (Figure) and wiring clips (Figure), tighten bolts to 12 N.m (105 in. lbs.).
  2. Connect electrical connector to throttle position sensor (Figure).
  3. Install the throttle cable (Figure).
  4. Install the air cleaner housing, refer to refer to AIR CLEANER HOUSING .
  5. Connect the negative battery cable and install the battery cover.
scientia non olet · About LEMON Manuals