Accessory Switch Bezel: Installation
WARNING: This page is about a different car, the 2003 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The accessory switches are serviced separately, but the cigar lighter/power outlet is not.
If replacing the accessory switch bezel, you must transfer the switches to the new bezel.
- Reconnect accessory switch bezel connectors (Figure ).
- Reinstall switch bezel into instrument panel opening and install two retaining screws (Figure ).
- Reinstall instrument panel center bezel. Refer to INSTRUMENT PANEL CENTER BEZEL .
- Reconnect the battery negative cable (Figure ).
- Close the hood.
- Verify vehicle and system operation.