LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2004 >> SRT-4 >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Ignition Control >> Knock Sensor >> Removal >> Removal - 1.6L

Removal - 1.6L

  1. Disconnect the negative battery cable.
  2. Remove the fuel rail cover (Fig 1 ).
    Fig 1: Removing Fuel Rail Cover (1.6L)
    G03537762Courtesy of DAIMLERCHRYSLER CORP.
  3. Locate the electrical connector (Fig 2 ).
    Fig 2: Locating Electrical Connector (1.6L)
    G03537763Courtesy of DAIMLERCHRYSLER CORP.
  4. Disconnect the electrical connector (Fig 3 ).
    5. Fig 3: Disconnecting Knock Sensor Electrical Connector (1.6L)
    G03537764Courtesy of DAIMLERCHRYSLER CORP.
  5. Remove the bolt holding the sensor (Fig 4 ).
    Fig 4: Removing/Installing Knock Sensor Bolt (1.6L)
    G03537765Courtesy of DAIMLERCHRYSLER CORP.
  6. Remove the sensor (Fig 5 ).
    Fig 5: Removing/Installing Knock Sensor (1.6L)
    G03537766Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals