LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2004 >> Neon SXT, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Removal & Installation >> Output Speed Sensor >> Removal

Output Speed Sensor: Removal

  1. Disconnect battery negative cable.
  2. Raise vehicle on hoist
  3. Disconnect output speed sensor connector. See Figure.
  4. Unscrew and remove output speed sensor. See Figure.
  5. Inspect speed sensor "O" ring and replace if necessary. See Figure.
scientia non olet · About LEMON Manuals