Installation - 2.4L SRT-4

Install grommet into dashpanel.
From the engine compartment, push the housing end fitting into the dashpanel grommet.
From the engine compartment, rotate the throttle lever forward to the wide open position and install cable clasp (Figure).
Install cable housing (throttle body end) into the cable mounting bracket on the engine.
From inside the vehicle, hold up pedal and feed throttle cable core wire through hole in upper end of the pedal shaft. Install cable retainer (Figure).
Install cable retainer clip (Figure).
Install the hose from the turbo to air cleaner box at the turbo and tighten clamp. Refer to AIR CLEANER HOUSING (2.4L Turbo, SRT-4).
Install the air cleaner box and install the hose from the turbo to air cleaner box and tighten clamp.
Connect the negative battery cable.