LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2004 >> Neon SXT, Automatic >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Injection >> O2 Sensor >> Removal >> Removal - 2.4L Turbo/2.4L SRT-4

Removal - 2.4L Turbo/2.4L SRT-4

  1. Disconnect the negative battery cable.
  2. Unlock and disconnect the electrical connector. It is on the passenger side near the EVAP purge solenoid.
  3. Raise vehicle and support.
  4. Remove sensor (Fig 1) using an oxygen sensor crow foot wrench such as Snap-On tool YA8875 or equivalent
Fig 1: Identifying Upstream O2 Sensor (2.4L Turbo)
G03538396Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals