Fuel Injection: Specifications: Torque
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| MAP SENSOR PLASTIC MANIFOLD | 1.7 | 15 | |
| MAP SENSOR ALUMINUM MANIFOLD | 3.3 | 30 | |
| POWER STEERING RESERVOIR PLASTIC MANIFOLD | 5.7 | 50 | |
| POWER STEERING RESERVOIR ALUMINUM MANIFOLD | 11.9 | 105 | |
| THROTTLE CABLE BRACKET PLASTIC MANIFOLD | 5.7 | 50 | |
| THROTTLE CABLE BRACKET ALUMINUM MANIFOLD | 11.9 | 105 | |
| EGR TUBE PLASTIC MANIFOLD | 5.7 | 50 | |
| EGR TUBE ALUMINUM MANIFOLD | 11.9 | 105 | |
| THROTTLE BODY BOLTS 2.4L | 28 | 20.65 | 250 +/-50 |
| THROTTLE BODY BOLTS 3.3/3.8L | 11.8 | 8.7 | 105 +/-20 |
| O2 Sensors | 27 | 20 | |
| The composite manifolds uses special Plastic screws. The factory installed Plastic screws can be removed and installed up to 5 times. Do not exceed the specified torque. These screws must be installed slowly (less than 600 rpms) to avoid melting the parent material. There are service repair screws avialable for repair. They require a higher torque than the original screws.. | |||