LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2004 >> Durango 5.7 D, 4WD >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Control >> Coil-Ignition >> Installation >> 4.7L V-8

4.7L V-8

  1. Using compressed air, blow out any dirt or contaminants from around top of spark plug.
  2. Check condition of coil o-ring and replace as necessary. To aid in coil installation, apply silicone to coil o-ring.
  3. Position ignition coil into cylinder head opening and push onto spark plug. Do this while guiding coil base over mounting stud.
  4. Install coil mounting stud nut. Refer to SPECIFICATIONS - TORQUE - IGNITION .
  5. Connect electrical connector to coil by snapping into position.
  6. If necessary, install throttle body air tube.
scientia non olet · About LEMON Manuals