LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2004 >> Caravan SXT >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules >> Power Liftgate Control Module >> Removal

Power Liftgate Control Module: Removal

  1. Disconnect and isolate the battery negative cable.
  2. Remove left D-pillar trim panel from the vehicle. Refer to INTERIOR article for the procedure.
  3. Disconnect the wire harness connections from the PLG motor assembly (Figure).
  4. Remove the screw holding the PLG control module to the D-pillar (Figure).
  5. Remove the PLG control module from the vehicle.
scientia non olet · About LEMON Manuals