LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Viper >> Repair and Diagnosis >> Transmission >> Clutch System >> Master Cylinder >> Removal

Master Cylinder: Removal

  1. Remove master cylinder actuation rod to clutch pedal clip.
  2. Remove anti-rotation pin from the toe box and discard pin.
    NOTE: Anti-rotation pin must not be reused.
  3. Disconnect clutch pedal position switch connector.
  4. Remove mounting screws on clutch fluid reservoir.
  5. Disconnect hydraulic line quick connector located at clutch bell housing. Use special tool 6638 to separate quick connector.
    CAUTION: Do not allow brake fluid to come in contact with painted surfaces of the vehicle. Paint damage may occur.
  6. Remove left inner fender for access to the master cylinder.
  7. Twist clutch master cylinder a quarter turn counterclockwise to remove from toe box.
  8. Remove assembly from vehicle.
scientia non olet · About LEMON Manuals