LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Viper >> Repair and Diagnosis >> Engine Mechanical >> Exhaust System >> Spout Assembly - Left/Right >> Installation

Spout Assembly - Left/Right: Installation

NOTE: This procedure covers installation of either the right OR left spout assembly. Install the appropriate parts for the side that is being worked on.
  1. Connect spout assembly to H-Pipe (Figure ). Do not  tighten band clamps at this time.
  2. Connect spout assembly to resonator (Figure ). Do not  tighten band clamp at this time.
  3. Install "B" pillar support isolator. Tighten bolts to 28 N.m (250 in. lbs.) (Figure ).
  4. Tighten band clamps to 54 N.m (40 ft. lbs.).
  5. Install sill panel (Refer to - SILL PANEL - INSTALLATION ) (Figure ).
  6. Lower vehicle.
scientia non olet · About LEMON Manuals