LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Viper >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Engine Coolant Temperature Sensor >> Installation

Engine Coolant Temperature Sensor: Installation

  1. Install sensor (Figure). Tighten to 27 N.m (20 ft. lbs.) torque.
  2. Connect electrical connector to sensor.
  3. Fill cooling system (Refer to STANDARD PROCEDURE - FILLING COOLING SYSTEM ).
scientia non olet · About LEMON Manuals