Service Specifications

SPECIFICATIONS

Application

Specification

Compressor Type

Denso 7SBU16C

Compressor Belt Tension

⁽¹⁾

Refrigerant (R-134a) Capacity

⁽³⁾⁽²⁾

Oil Capacity ⁽³⁾⁽⁴⁾

Total System Fill

13.9 oz. (410 ml)

Total System Fill (With Rear A/C)

14.4 oz. (425 ml)

Receiver/Drier

1.0 oz. (30 ml)

Condenser

1.0 oz. (30 ml)

Front Evaporator

2.0 oz. (60 ml)

Rear Evaporator

1.0 oz. (30 ml)

Compressor

⁽⁴⁾⁽²⁾

System Operating Pressures ⁽⁵⁾

High Side

160-235 psi (11.2-16.5 kg/cm² )

Low Side

20-35 psi (1.4-2.5 kg/cm² )

⁽¹⁾	Dynamic tensioner automatically adjusts belt. Tension is okay if indicator is within marked limits on belt tensioner.

⁽²⁾	Refer to the Underhood Specification Label in the engine compartment.

⁽³⁾	Use SP-15 PAG refrigerant oil.

⁽⁴⁾	Drain and measure the oil from the old compressor.

⁽⁵⁾	Measured at ambient air temperature of 80°F (27°C).