LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Sprinter 3500, 2.7 41 >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Ignition Control >> Glow Plug >> Installation

Glow Plug: Installation

  1. Screw glow plug(s) into cylinder head and tighten to 12 N.m (115 lbs. in) (Figure ).
  2. Connect the glow plug wiring harness connector(s)
  3. Connect negative battery cable.
scientia non olet · About LEMON Manuals