LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> SRT-4 >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules >> Controller Antilock Brake >> Removal

Controller Antilock Brake: Removal

  1. Disconnect battery negative cable.
  2. Raise vehicle.
  3. Disconnect pump/motor connector from CAB (Fig 1).
    Fig 1: Locating CAB Mounting Screws And Pump/Motor Connector
    G02654477Courtesy of DAIMLERCHRYSLER CORP.
  4. Remove four screws securing CAB to HCU half of ICU (Fig 1). Remove CAB from HCU.
  5. Pull outward on CAB connector lock and disconnect 24-way wiring connector. Remove CAB from vehicle.
scientia non olet · About LEMON Manuals