LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Neon SXT, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Removal & Installation >> Input Speed Sensor >> Installation

Input Speed Sensor: Installation

  1. Verify "O" ring is installed into position.
  2. Install and tighten input speed sensor to 20 ft. lbs. (27 N.m).
  3. Connect speed sensor connector.
  4. Install air cleaner/throttle body assembly.
  5. Connect battery negative cable.
scientia non olet · About LEMON Manuals