LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Neon SXT, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> 41TE Automatic Transaxle >> Speed Sensor - Input >> Installation

Speed Sensor - Input: Installation

  1. Verify o-ring is installed into position.
  2. Install and tighten input speed sensor to 27 N.m (20 ft. lbs.).
  3. Connect speed sensor connector.
  4. Install air cleaner/throttle body assembly.
  5. Connect battery negative cable.
scientia non olet · About LEMON Manuals