LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Neon SXT, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Diagnostic Procedures >> No-Start Diagnosis >> Engine Cranks But Does Not Start >> Notes

Engine Cranks But Does Not Start: Notes

NOTE: For circuit identification and wiring diagram, see WIRING DIAGRAMS . If Powertrain Control Module (PCM) is replaced, PCM must be reprogrammed. See PROGRAMMING in REMOVAL & INSTALLATION - NEON, SRT-4 & SX (Canadian) article. After each repair procedure has been completed, reconnect all components. Perform POWERTRAIN VERIFICATION TEST VER-1 to ensure system is functioning properly. See the following:
  1. On 2.0L, see POWERTRAIN VERIFICATION TEST VER-1 under VERIFICATIONS TESTS in SELF-DIAGNOSTICS - NEON & SX (CANADIAN) - 2.0L article.
  2. On 2.4L, see POWERTRAIN VERIFICATION TEST VER-1 under VERIFICATIONS TESTS in SELF-DIAGNOSTICS - SRT-4 - 2.4L article.
scientia non olet · About LEMON Manuals