LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Grand Caravan EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Engine Cooling System) >> Radiator >> Installation

Section 50 (Engine Cooling System): Radiator: Installation

WARNING: This page is about a different car, the 2002 Dodge Grand Caravan, 2002 Dodge Caravan, 2002 Chrysler Voyager, and 2002 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Be sure the air seal is in position before radiator is installed.  Slide radiator down into position. Seat the radiator with the rubber isolators into the mounting holes provided, with a 10 lbs. force.
  2. Position air conditioning condenser onto the radiator lower mounts and install upper screws (Figure). Tighten fasteners to 5 N.m (45 in. lbs.).
  3. Install the radiator upper and lower hoses (Figure) or (Figure).
  4. Connect the coolant reserve/recovery hose.
  5. Connect the vapor purge solenoid to the mounting bracket.
  6. Install the radiator fans. (Refer to INSTALLATION ).
  7. Install the radiator upper crossmember support.
  8. Fill the cooling system. (Refer to STANDARD PROCEDURE ).
  9. Connect negative cable to battery.