Section 2 (Engine Controls - Self-Diagnostics): Programming: Notes

WARNING: This page is about a different car, the 2002 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Programming procedures are written specifically for Chrysler's Diagnostic Readout Box (DRBIII®) scan tool. A generic scan tool may not be capable of performing all necessary procedures.

NOTE: If the Powertrain Control Module (PCM) and the Sentry Key Immobilizer Module (SKIM) are replaced at the same time, program the VIN into the PCM first. See POWERTRAIN CONTROL MODULE under POWERTRAIN CONTROL MODULE. After programming PCM, program SKIM (if equipped). See SENTRY KEY IMMOBILIZER MODULE .