LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Message Systems) >> Overhead Console >> Installation >> Installation-Overhead Console

Installation-Overhead Console

WARNING: This page is about a different car, the 2004 Dodge Dakota and 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the overhead console near the mounting location on the headliner.
  2. Reconnect the roof wire harness connector to the overhead console wire harness connector.
  3. Align the locating pin on the rear of the overhead console housing with the receptacle in the rear of the overhead console bracket.
  4. Align the two snap clips on the overhead console housing with their receptacles in the overhead console bracket.
  5. Push upward firmly and evenly on the sides of the overhead console housing over both of the snap clip locations until each of the two snap clips is fully engaged with its receptacle in the overhead console bracket.
  6. Install and tighten the screw that secures the front of the overhead console housing to the overhead console bracket. Tighten the screw to 1.9 N.m (17 in. lbs.).
  7. Reconnect the battery negative cable.
scientia non olet · About LEMON Manuals