Power Distribution Center: Operation

All of the current from the battery and the generator output enters the PDC through one cable with eyelets that are secured with a nut to the one B(+) terminal stud located just inside the inboard side of the PDC housing. The PDC cover is unlatched and removed to access the battery and generator output connection B(+) terminal studs, the fuses, the relays, the joint connectors and the engine wire harness inline connector. Internal connection of all of the PDC circuits is accomplished by an intricate combination of hard wiring and bus bars. Refer to SYSTEM WIRING DIAGRAMS for the location of complete PDC circuit diagrams.