LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 4.7 N, RWD >> Repair and Diagnosis >> Engine Mechanical >> Exhaust System >> Heat Shields >> Installation

Heat Shields: Installation

  1. Position the heat shields to the floor pan or the frame and install the screws and nuts.
  2. Tighten the screws/nuts to 7 N.m (60 in. lbs.) torque. Tighten the muffler hangers to 23 N.m (200 in. lbs.)
  3. Lower the vehicle.
scientia non olet · About LEMON Manuals