LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2002 >> Viper RT/10 >> Repair and Diagnosis >> Body & Frame >> Power Mirrors >> Power Mirror Switch >> Installation

Power Mirror Switch: Installation

  1. Connect the power mirror switch to the wire harness.
  2. Feed the switch and harness into the instrument panel.
  3. Position the switch in the instrument panel.
  4. Install the power mirror switch retaining ring.
  5. Connect the three wire harness connectors on the back of the radio.
  6. Position the radio in the instrument panel.
  7. Install the two radio retaining screws.
  8. Install the center trim bezel.
  9. Install the IOD fuse in the PDC.
scientia non olet · About LEMON Manuals