Specifications Index
VIPER SPECIFICATIONS INDEX
| System | Specification/Procedure | |
|---|---|---|
| Air Conditioning | ||
| Service | SPECIFICATIONS | |
| Torque | TORQUE SPECIFICATIONS | |
| Axle Nut/Hub Nut | 190 Ft. Lbs. (257 N.m) | |
| Battery | BATTERY SYSTEM SPECIFICATIONS | |
| Brakes | ||
| Bleeding Sequence | BLEEDING BRAKE SYSTEM | |
| Disc Brakes | BRAKE SYSTEM SPECIFICATIONS | |
| Torque | TORQUE SPECIFICATIONS | |
| Charging | ||
| Generator | GENERATOR | |
| Torque | N/A | |
| Drive Belts | ||
| Adjustment | DIAGNOSIS AND TESTING - ACCESSORY DRIVE BELT DIAGNOSIS | |
| Belt Routing | See Figures under REMOVAL | |
| Engine Cooling | ||
| General Service Specifications | SPECIFICATIONS | |
| Radiator Cap Pressure | 16-18 psi (110-124 kPa) | |
| Thermostat R & I | ENGINE COOLANT THERMOSTAT | |
| Water Pump R & I | WATER PUMP | |
| Engine Mechanical | ||
| Compression | CYLINDER COMPRESSION TEST | |
| Oil Pressure (CAUTION: If oil pressure is 0 at idle, DO NOT operate engine at 3000 RPM. | Oil pressure should be 68.9 kPa (10 psi) at idle or 310-517 kPa (45-75 psi) at 3000 RPM. | |
| Overhaul | ENGINE SPECIFICATIONS | |
| Torque | TORQUE SPECIFICATIONS | |
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | |
| Flywheel/Drive Plate/Flex Plate Torque | 55 Ft. Lbs. (74 N.m) | |
| Fuel System | ||
| Fuel Filter Location | FUEL FILTER | |
| Pressure Specifications | FUEL SYSTEM PRESSURE | |
| Fuel Pressure Test Procedure | N/A | |
| Fuel Pressure Release Procedure | STANDARD PROCEDURE - FUEL SYSTEM PRESSURE RELEASE PROCEDURE | |
| Ignition | ||
| Firing Order & Cylinder Identification | FIRING ORDER & CYLINDER IDENTIFICATION | |
| Ignition Wires (Resistance) | CABLE RESISTANCE CHART | |
| Ignition Wires (Routing) | SPARK PLUG WIRE ROUTING | |
| Spark Plugs | SPARK PLUG | |
| Starting | ||
| Starter | SPECIFICATION - STARTER | |
| Torque | TORQUE | |
| Wheel Alignment | ||
| Adjustment Specifications | ALIGNMENT SPECIFICATIONS | |
| Torque | TORQUE SPECIFICATIONS | |
| Wheel & Tire | ||
| Lug Nut Torque | 90 Ft. Lbs. (122 N.m) | |